Відео

Have u seen these new motor

I love it ❤

youra MF talker!

Just remember, too rich causes power loss and fouls plugs. Too lean seizes engines and burns holes in pistons. Be very sure it is too rich before going to a smaller jet, and only go down ONE size. Then keep a close eye on the plug. It should be a dark brown, but not black. I am not a fan of "plug chops" To me that is a gimmick that really doesn't tell you anything. I like to put 25-50 miles on a plug, under different riding conditions, and then check it. If your 2 stroke engine has been fouling plugs, and you didn't mix too much oil with the gas, you can safely go down one size and put some miles on it. And remember, an engine will always run best when it is right on the edge of being too lean. That is something you don't want.

Thats my problem, way too much pre-load...on my shaft.

Does the chain run on the tires cuz that’s what it does on mine?

😂😂😂hair care products!!! 😂😂😂

So my has been sitting for 3 or 4 years, and I emptied the gas clean the car and got it to run, but it only runs for 13 to 14 seconds what would my problem be?

You can adjust A/F ratio on the carburetor needle by moving the c clip upwards to lean or downwards to rich the air fuel ratio

Thank you. Great Video!

Do you need a torque converter for the 4 stroke or can you ride with just a clutch and rear sprocket?

You solo good tanks

I watched this video before buying my 49cc 4 stroke kit and 2 yrs later I’m still enjoying the bike with no issues. Well I did have to replace the stock carb because I left it outside in the winter months

I own a HImiway cruiser. This thing would be great, but it won't compete with the market. WAY overpriced @$1500, onsale. Which is a joke. this was not a review, it's an ad he probably got paid to do.

Thankyou man very good info,now my motoubike clutch is working again thank's to you..GRACIAS

Best Performance Upgrades for Motorized Bicycles is good BREAKS !! You made my day :)) But this is worst thing for me, cuz i'm Russian! ;) If the other advises are the same - it is not good channel....

I used to drive a electric pallet jack in warehouse an used to honk my horn a lot when coming to a conner slowing down to make sure it was clear everytime looking left an right , i do the same on my bike i haven't been hit , but have had more than a hand full of close calls , i know when i can go fast in some places at some times but im thinking i should slow down some , i do like it at late night when theres no traffic can take the main road sometimes

We need a proper hands on review of this bike but thanks

Torque sensor ergh. I love cadence however i can't wait for this to hit the uk market. You Americans are lucky you have 20 mph, 500w, throttle in the uk thats illegal. Were allowed 15.5 mph, 250w, no throttle

Did they change the jet size of the NT carb to 7 mm? I ordered 5 mm jets and they don't fit. I can't seem to find the 7mm jets for this carb. Are you familiar with this? Update! I just found them on your store page! Thanks!

I ordered a whole set of 5 mm jets for my NT carb and then find out it needs 7 mm. Everyone is saying you need 5 mm. WTF is going on??

Water damage in my coil I fried it out corrosion I think is caused by Short circuit result in death of coil I ordered the coil and a CDI

I just took my carb out and that fell out I don’t know how to put it in I tryed and it won’t start still can you make a video of you putting the o ring one

Your the best Hughes! I bought a swhinn beach cruiser from recycled bike shop . Need off set pedals, then motor ... thanks for your videos!!!!😊

You have a passion for motors. I started late . appreciate experience thanks bro

Thanks from Pennsylvania, 2024/6

My brand motor that I have calls for 32:1 I've also seen the same looking motor online that says 25:1 and now I've seen a lot of people online saying run 40:1???

wpeople dont like the rag joint but i do..I didnt at first but after you get your method down its all cake and they are soooo cheap and work great..if im browsing and catch one for sale for 5 to 7 bucks i order it and just put a back wheel together for standby I have 4 standby a now..take care and peace

I need help with my motorized bike does anyone have any knowledge

My neighbor just brought me a broke down bike with a seized clutch. I ordered a new engine kit for it. Gonna follow these instructions before i ever run it. TY!

Can that drive gear cause idle issue's also? I changed the coil and magneto, that drive gear is also slipping. Also whats the exact purpose for the spring under the clutch plate? I notice the one i have here is missimg it.

Will this make my 20mph 80cc 2stroke bicycle go 40mph ?

Great video thanks for sharing it bro I just recently finished a new build on my channel also

If you put a Pet in the basket be sure to put some kind of solid platform so its leg doesn't go thru the basket to the gears .

I got the 250w coming now im a bit concerned I'll be a turtle but i guess i can use my Ebike for speed since i decided to have the best of both worlds. I just have some hills

What forks you used ?

Looks like a good machine for the price

Normally you have to install a rope crinkle for the start and not the compression and release the gas when you shift and you unshift

The chain of a moped is not bigger. They designed this to make the tourine not the race of 1 and two its help in screeching when you are in the mountains..whatever the machine if you ch Change your speed no matter how it's broken.. EVEN A NORMAL BIKE WITH PEDAL BY PEDALING! YOU DON'T NEED A SECONDARY 5 TO KNOW ITS

Honestly the best video

Thank you, man working on our OCC chopper build helped out a lot

Loved it❤

What do I do if I don’t have this tool?

WHEN HE SAID GET YOUR NUTSACK RIPPED OPENED I AUTOMATICALLY DON'T WANNA INSTALL SPRING FORKS ON MY BEACH CRUISER ANYMORE

Finally someone making videos about these bikes built mine had a hell of a time. Wish i would known about your channel

after 2 years, my engine mount stud broke in the middle - it was not a thread failure at any end. Just replace them with higher quality ones right from the start to save yourself a headache down the road.

Do you have a video installing a pull start? As well as a cvt on a 2 stroke motorized bike?

Threadlock EVERYTHING. Thanks for sharing.

Good to see 👀 you at the motorized game still 👌 👏 👍. I will check out your store 😀

The butt bump method did the trick thanks a million. UA-cam university does it again